optoVIS-4 - transmission of visible light intensity
The optoVIS-4 system is used for the digital optical transmission of visible light intensity which is converted to an electrical output signal. With this setup the correct light output and flickering of different lighting solutions in the industrial and automotive sector can be evaluated ...
optoChargeCom-CP (= Control Pilot)
The optoChargeCom-CP system is a bidirectional optical transmission device that transmits communication data between an Electric Vehicle Supply Equipment (= EVSE), i.e. a charging Station, and an Electric Vehicle (= EV)...
optoCAN-FD SIC (= Signal Improvement Capability)
The optoCAN-FD SIC system can be used for the optical transmission of high speed CAN signals with transmission rates of up to 8 Mbit/s...
Rosenberger H-MTD® connectors
Many of our devices can be be built with Rosenberger H-MTD connectors with an even better EMC performance....
Our software for motion detection was extended
mk-motion: Licence #20 Combiner released
The Combiner allows advanced analysis scenarios by combining the output of multiple detectors into new “virtual” detectors.
optoTTL for remote control of the Schwarzbeck RC-LISN interface
We also offer remote control interfaces for different EMC devices. One version of our optoTTL is optimized for the remote control of the Schwarzbeck Mess-Elektronik OHG LISN option RCCAB2 and RCCAB3.
opto5x base unit - up to five LIN or CAN channels in one housing
| opto5x base unit with 5 LIN channels | opto5x base unit with 5 CAN-FD channels |
 |
 |
For test setups with many CAN or LIN channels, setup time and place can be reduced by using our opto5x devices...
dAV-TRX Matrix - intercom
Two intercom systems with the new features were delivered at the beginning of this year: 19" matrix with several mobile and table top devices...