Information

optoUART

optoUART from mk-messtechnik GmbHThe optoUART system can be used for the optical transmission of UART signals up to a data rate of 1 Mbit/s.

The optoUART system can be used for the optical transmission of bidirectional serial UART signals up to a data rate of 1 Mbit/s.It can be used to transmit UART signals over long distances or to handle ground potential problems.

With the optical transmission and the shielded case, the system is well equipped for EMI and EME tests.

 

Application

Setup optoUART

Technical Data

Channels: 1
Data rate: up to 1 Mbit/s
Data direction: bidirectional
Signal I/O: SUB-D 9pin female
Power supply: integrated batteries 4 Ah, consisting of 5x NiMH cells, 6 V
operating time with fully charged batteries: approx. 20 h
Switch for voltage level: UART voltage levels can be set to: 1.8 V / 3.3 V / 5 V
Housing: aluminium with rubber protectors
approx. 135 mm x 86 mm x 65 mm
Weight: approx. 800 g, each device
Optical connector: 2x FSMA / duplex multimode fiber 62.5/125 µm, OM1

Downloads

Options

  • external power pack with 5 cells (4 Ah or 10 Ah) for run time enhancement
  • push-pull charge connector (advantage: shorter setup time)
  • ...