Information

optoUSB2.0-RBDIR

 

The optoUSB2.0-RBDIR is replaced by the successor optoUSB2.0-VA6K

 

The optoUSB-2.0-RBDIR system can be used for the optical transmission of USB-signals up to a data rate of 480 Mbit/s according to USB2.0 with high quality shield connection.
In addition, a direct mode (at the integrated Type A plug) can be chosen, which bypasses the Hub for special applications. Also, a DUT connected to the HUB could be powered by an external 5 V supply. The link can be used to transmit USB-signals over long distances or to handle ground potential problems. With the optical transmission, the high quality shield connection of the HSD plugs and the shielded case, the system is well equipped for EMI and EME tests.

optoUSB-RBDIR

 

Product

Download

optoUSB2.0-RBDIR

 

As an alternative to the USB-A/B connectors we offer HSD connectors for the automotive use which have a better RF performance concerning emmission and immunity.

For this, we have different connector cables avaible as shown below:

  • Cable with Rosenberger HSD-plugs/USB-A-plugs and HSD-plugs/USB-B-plugs

optoUSB with adapter cable Rosenberger HSD to USB-A/-B

  • Cable with Rosenberger HSD-plugs/USB-A-plugs/ bzw. HSD-plugs/USB-A-female plug

optoUSB with adapter cable Rosenberger HSD/USB-A-plug and HSD/USB-A-socket

 

 

 

 

  • Setup with description

optoUSB with adapter cable

 

optoUSB2.0

optical transmitter for USB2.0 signals: optoUSB2.0

The optoUSB-2.0 system can be used for the optical transmission of USB-signals up to a data rate of 480 Mbit/s according to USB2.0. It can be used to transmit USB-signals over long distances or to handle ground potential problems. NOTE: This USB link has no RF improved USB connector and is not meant for being used directly with a DUT. Use optoUSB2.0 -RBDIR instead

 

Product

Download

optoUSB2.0