optoGPIB
The optoGPIB system can be used for the optical transmission of GPIB signals. The devices use standard negative TTL logic (transistor-transistor-logic with a dominant low level). The logic
levels gets detected at: low level ≤ 0.8 V and high level ≥ 2.0 V.
The standard connector is GPIB (IEEE 488.1). With the optical transmission, the shielded case and the high quality connector, the system is well equipped for EMI and EME tests and has proven its functionality in many automotive EMC labs already.
Application
Technical data
| Channels: | 1 |
| Data rate: | up to 10 Mbit/s |
| Data direction: | bidirectional |
| Input: | GPIB connector (IEEE 488.1) |
| Output: | GPIB connector (IEEE 488.1) |
| Power supply: | integrated batteries 4 Ah, consisting of 5 NiMH cells, operation time with fully charged batteries: approx. 8 h |
| Housing: | aluminum with rubber protectors approx. 118 mm x 80 mm x 50 mm |
| Weight: | approx. 760 g each device |
| Optical connector: | 2xFSMA / 1xduplex multimode optical fiber 62.5/125 µm |
Options
- 5 cell external power pack (4A h or 10 Ah) for run time enhancement
- various adapter cables and customized solutions
- push pull charge connector (advantage: save setup me)
- 19” housing with up to 13 different optical devices integrated (on the photo: optoGPIB is the second channel from the right)
Downloads
Datasheet optoGPIB (PDF)